The new SpaceCage is not only a bottle cage, it also features storage. The storage compartment is easily secured in place with a bayonet catch. You can use the compartment to carry your repair kit, keys or change. The bottle cage is made of light but high strength plastic and is equipped with the an adjustable nose to adapt the cage for different bottle sizes. - Storage compartment below the bottle cage - High strength plastic construction - Adjustable nose adapts the cage to different bottle sizes
Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.
MSW's PC-110 Water Bottle Cage secures your bottle while keeping weight to a minimum. The lightweight plastic is durable, and easily secures your bottle.
Profile Design's Razor 2 Bottle System consists of their featherweight Profile carbon Kage and their 20-ounce Razor aero bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine more for additional free speed. It fits nicely on road bikes, and improves the aerodynamics there, too.
Sometimes you don't want to leave your cup of joe at home. Enter: Portland Design Works' Bar-ista to keep your morning beverage within easy reach. This handy accessory fits most travel mugs and attaches to 26.0mm handlebars. Drop in your travel mug (with a good lid to avoid splash stains) and enjoy the ride. - Constructed of 5052 alloy and lined with rubber to better grip travel mugs - Weight: 71g (2.5 ounces) - Dimensions: 8cm (3.125") diameter at top, tapering to 7.5cm (2.95") at bottom - Lifetime PDWarranty
Lezyne's Power Cage is made from hollow aluminum for strength and reliability. And, its wraparound design holds your bottles securely over the rough stuff and allows for easy in/out.
$15.00 - $16.00
Stay hydrated and show your allegiance to speed with Zipp's Water Bottle. They're made by Purist and feature bold Zipp logos so you're always repping.
$7.99 - $8.99
Get to grips with your thirst, with the innovative Gripper bottle. The unique non-slip surface gives you maximum grasp, whatever the weather. The bottle is BPA free and features Fabric's high-flow valve and silicone mouthpiece. - Unique textured surface - Soft squeezable body - Silicone mouthpiece - BPA free
This 18-gram water bottle cage is nearly as light as air. The cold forged, single body aluminum construction grabs hold of your water bottle until you need to wet your whistle. Its handsome and streamlined design will complement any bike. - Cold forged, single body aluminum construction - Tapered arms for easy water bottle access - Bolt-on mounting - Weight: 18 grams
An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable
Innovative design with side and bottle insertion/removal - Carbon injection bottle cage - Extremely light, 25 grams - Compatible with all frames, ideal for sloping tubes or small sizes
$6.99 - $7.99
Key features: - All new cap and bottle design for great feel and consistent closure - 100% FDA approved biodegradable plastic - BPA and BPS free - Triple-seal cap provides leak-proof functionality - Soft thermoplastic poppet is easy to open and close - Wide mouth for easy addition of powdered drinks or ice cubes - 2 sizes available : 21oz and 26oz - Manufactured in the USA
$6.99 - $7.99
Key features - All new cap and bottle design for great feel and consistent closure - 100% FDA approved biodegradable plastic - BPA and BPS free - Triple-seal cap provides leak-proof functionality - Soft thermoplastic poppet is easy to open and close - Wide mouth for easy addition of powdered drinks or ice cubes - 2 sizes available : 21oz and 26oz - Manufactured in the USA
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
- Stainless steel construction - Won’t rust or scuff water bottles - 4mm welded stainless steel construction - 41 Grams
The original Blackburn cage design. - Welded aluminum for lightness and strength - Aluminum construction - Budget-friendly - 47 grams
$9.99 - $12.00
Cannondale’s GT-40 Aluminum Cage provides easy bottle access in a wrap-around design that holds bottles securely even on rough roads and trails. Plus, at 40 grams, it’s light, too!
$6.99 - $7.99
Hydrate like the best Stay hydrated on every ride with the leak-free design of the Waterloo Water Bottle. The double redundancy of the triple-seal cap and thermoplastic poppet provide a consistent locking closure that eliminates leaks, while a great in-hand squeeze and on-bike fit keeps refreshing water always at the ready. Product details - All new cap and bottle design for great feel and consistent closure - 100% FDA approved biodegradable plastic - BPA and BPS free - Triple-seal cap provides leak-proof functionality - Soft thermoplastic poppet is easy to open and close - Wide mouth for easy addition of powdered drinks or ice cubes - Two sizes available: 21oz and 26oz - Manufactured in the USA
Side loading for smaller frames This side-loading cage lets you easily access bottles from small spaces while you ride. It's suitable for road and MTB use and is the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Water bottle access from the left side when mounted on the downtube - Water bottle access from the right side when mounted on the seat tube - Suitable for road and mountain use - Use with the Right Side Load Cage for seat tube and downtube access on the same side of frame
Origin-8's Pro Lite Alloy Cage is made of light and durable aluminum and provides a secure grip on your bottles. It's perfect for all your bikes and adds a touch of class.
- Universal alloy water bottle cage - Hardware included - Size: 6mm
$4.99 - $6.99
Sunlite's Alloy Cage comes in a rainbow of colors to match your bike. It's light, holds fast and looks great.
• Handlebar mounted cup holder • Insulated design • No tool installation • Fits 22.2mm - 31.8mm bars
Sunlite's ATB Bottle Cage is made of heavier aluminum than the regular bottle cage to keep your bottle in place on bumpy rides. It's still light and looks great.
Planet Bike's Sideload Cage is perfect for smaller frames and compact geometry. This cold-forged aluminum cage loads from the right on downtubes and the left on seat tubes. And, it's only 41 grams!
$25.00 - $45.00
An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible. - 100% anodized aluminum - LockTight Wings - Laser etched design - Road and MTB approved - High-end and durable
Stay aero and stay hydrated with Profile's Aqualite! Featuring an easy-to-refill, no-splash cap, this durable, injection-molded 22-ounce bottle includes an extended straw for easy access. And, the Aqualite fits both wide and narrow-mounted aerobars easily with Profile's Aerodrink bracket (sold separately).
Dimension Butterfly Water Bottle Cage. -Cage Material: Aluminum -Mount Type: Bolt-On -Weight: 52 g
This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension