Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Safety

See and be seen!  Rear view mirrors, safety flags, bells and horns; all kinds of things to help keep you safe.

Delta Airzound Bike Horn
$39.99
- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting
Sprintech Drop Bar Rearview Mirror
$24.99 - $34.99
Retro Mirror Sprintech Single Mirror. Works with all road handlebars by attaching to the bar end using its simple retrobike install. Allows you to see traffic from behind without having to look over your shoulder. Expands your visual field without shifting head or body to see behind you. As reliable as a car's rearview mirror! Placed on the left side of the handlebars, the Sprintech rearview mirror is easy to install. Simply remove the cap from the end of the handlebar, insert the connector plug, and attach the Sprintech rearview mirror. Once installed, simply adjust to the desired position. Available in five colors: Black, White, Red, Yellow, and Blue. Also available in pairs!
Sprintech MTB Upright Bar Rearview Mirror
$34.99
Retro Mirror Sprintech MTB/City Pair of Black Mirrors. Mirrors for Mountain Bikes/Straight Bar. Ideal for urban commuters. Placed on both sides of the handlebars, the Sprintech MTB/City rearview mirror is easy to install. Simply remove the caps from each end of the handlebars and insert the Sprintech MTB/City rearview mirrors. Once installed, simply adjust to the desired position.
Timber Timber 3.0 Bolt-On
$34.99
Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.
Portland Design Works Alexander Graham Bell
$25.00
Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - ?Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty
Portland Design Works King Of Ding II Bell
$25.00
Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars
Lezyne Classic Handlebar Mount Brass Bell
$24.99
Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell. - Compact, classic bell-shape construction for a high-quality sound - Bell and striker are made from high-polished brass - CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube - Molded rubber shims add grip and fine tune fitting - Stainless steel hammer - Impressively loud ring - Weight: 34g
Mirrycle Incredibell Striker Bell
$20.00 - $23.00
Keep valuable handlebar space free with Mirrycle's Incredibell Striker Bell. It integrates into the top cap of the headset, can be mounted any way you choose, and features an adjustable dinger as well. A flick of your finger and the Striker Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1") - Weight: Black and silver: 36g (1.3oz); Brass: 68g (2.4oz)
Mirrycle LTD Mirrycle Mirror (Bontrager Isozone)
$22.99
The LTD Mirrycle Mirror quickly attaches to Bontrager Isozone handlebars using the supplied wrench. It has a convex mirror for a wide field of view to help you clearly see approaching traffic. And the mirror easily adjusts to your optimum viewing angle.
Incredibell Trail Bell
$20.99 - $21.00
Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.
Mirrycle Incredibell Spring Bell
$17.99 - $21.00
Mirrycle's Incredibell Spring Bell offers a traditional Asian-style bell that integrates into the top cap of the headset to free up valuable handlebar space. The bell can be mounted any way you choose on the headset, and the dinger is adjustable as well. A flick of your finger and the Spring Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1.8") - Weight: Black and Silver: 26g (.9oz), Brass: 57g (2oz)
Serfas MR-2 Stainless Lens Mirror
$20.00
Ride smart and more safely with Serfas Bar End Mirrors to help increase awareness and visibility of your surroundings as you ride. - Unbreakable Stainless Steel Lens - Base: Eco-Friendly High Impact Nylon Fiber - Universal Design For Left & Right - Fits Handlebars With 16mm-22mm Diameter Bar Ends - Lens: 68mm Diameter
Burley Flag Kit
$19.99
Replacement safety flag for extra visibility.
Knog Oi Bell - Large
$19.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
Knog Oi Bell - Small
$19.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
MSW Selfie Mirror
$19.99
Keep an eye on what's behind you with MSW's Selfie Mirrors. With options to mount on a handlebar, on your helmet, or into your bar end with a folding design, you're free to choose the rear view that speaks to you.
Mirrycle Mirrycle Mirror
$18.99
The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter
Planet Bike Courtesy Bell Classic
$18.99
Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell Classic. This bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.
Planet Bike Courtesy Clincher Bell
$18.99
The beauty of this little bell's unique design is that it securely attaches to your bike's cable housing so it doesn't require any real estate on your handlebars. Mount it within reach of your thumb or forefinger and ring out a crisp "ding, ding, ding" when you merrily pedal past on the left. - Clip mount quickly and securely attaches to cable housing - Diminutive size and clip mount free up handlebar space - Lightweight brass bell has a clean sound - 360-degree dinger rotation for perfect positioning - High fatigue spring
Bike Peddler Take a Look Eyeglass Mirror
$17.99
- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter
Electra Horizon Domed Linear Bike Bell
$17.99
The perfect way to say 'Hello.' Or 'hey there,' 'coming through,' and 'sup.' We've made ringing an art form. Choose from our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Proprietary spring ringer - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: Universal - Material: Brass
Electra Jellyfish Domed Linear Bike Bell
$17.99
The perfect way to say 'Hello.' Or 'hey there,' 'coming through,' and 'sup.' We've made ringing an art form. Choose from our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Easy-to-push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: Universal - Material: Brass
Third Eye Pro Helmet Mirror
$17.99
- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets
Incredibell Crown Bell
$17.00
Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters
MSW Big Ringer Bell
$16.00
This is a big bell with a big ring. At 83mm across, this steel bell sends a loud, two-tone ring that is sure to catch the ear of anyone in your path. The handlebar mount on the bottom of the bell is adjustable to fit all common handlebars and holds tight for surefire ring-ability while you roll.
Electra Ding Dong Bell
$15.99
The necessary final touch on your favorite bicycle, Electra's Ding Dong Bell is the perfect form-meets-function accessory. This classy bell has a pleasant ding-dong sound and simply clamps onto your handlebars for easy installation. Pick the one that expresses you! - Oversized bell with cheerful "ding-dong" doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware
Electra Disco Small Ding-Dong Bike Bell
$15.99
The perfect way to say 'Hello.' Or 'hey there,' 'coming through,' and 'sup.' We've made ringing an art form. Choose from our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Cheerful 'ding-dong' doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware - 22.2mm clamp diameter - Mounting Location: Handlebar - Clamp: 22.2mm - Material: Steel - Weight: 130g
Electra Northern Lights Small Ding-Dong Bike Bell
$15.99
The perfect way to say 'Hello.' Or 'hey there,' 'coming through,' and 'sup.' We've made ringing an art form. Choose from our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Cheerful 'ding-dong' doorbell-style ring - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: 22.2mm - Material: Steel - Weight: 130g
Lezyne Classic Brass Bell
$15.99
Lezyne's Classic Brass Bell features a compact, classic shape constructed from modern, high-quality materials. The bell itself is made from high-polished brass, mounted to a machined aluminum base. The small brass striker provides a sharp, impressively loud ring when flicked, warning others of your presence. A simple O-ring attaches the bell to a variety of tube sizes and shapes while integrating cleanly with any bicycle. Weights - Small: 21g - Medium: 28g
Lezyne Classic Shallow Brass Bell
$15.99
Modern, unique low-profile design made from high-polished brass, mounted to a machined aluminum base. The brass striker politely and effectively alerts others with a sharp, definitively loud ring. A simple O-ring attaches the bell to a variety of tube sizes and shapes, elegantly complementing all styles of bikes.
Page 1 of 4 Next page