Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Brakes/Levers/Pads

Paul Component Engineering Touring Cantilever Brake
$113.00
- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA
Odyssey Springfield Brake Kit
$29.99
The Springfield Brake Kit will provide easy braking upgrades along with value, as the kit will be more affordable than buying each part individually. All necessary hardware will be included as well. Doesn't get much better! - One spring design - Comes with GHOST PADS - Hinged lever clamp - Medium sized lever
Odyssey Springfield Brakes
$17.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield brake drops the two ordinary (and confusing) brake springs and replaces them with one central spring that applies the same force to each arm, requiring no additional adjustment. This makes assembly incredibly easy–just bolt it on and go. The brake arms are designed to maximize stiffness and save weight without adding excessive cost. By die-casting the arms and using shared tooling to make each side, the Springfield meets all of the original design goals, resulting in a very powerful and affordable brake.
Odyssey Springfield Lever
$10.99
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable. The Springfield lever is easy to install and remove without having to wrestle grips on and off. An ordinary hinged clamp can be bulky and expensive so a new clamping design made specifically for die-casting was used. This approach keeps the lever reliable and affordable. The lever handle is the same comfortable shape as the proven Monolever Medium blade.
Magura Disc Brake Adapters
$13.00
- Disc brake adapters for Magura 74mm disc brake calipers - IS: 51mm International Standard, PM: 74mm Post Mount
Magura Disc Brake Transport Clip
$6.83
- Plastic clip prevents pistons from pressing in while wheel is off of the bike - Fits: Marta, Louise, Clara, Julie
Magura HS33 R Hydraulic Rim Brake
$168.00
The HS33 R is the newest hydraulic safety rim brake in radial design in a portfolio of test-winning products. With its high braking power, reduced weight and perfect ergonomics, it makes an ideal partner for both road and off-road – and is equally suited for traditional, city and eBikes. Well worth a demo! - The improved legendary HS33 rim brake features a redesigned master cylinder and 2 finger lever blade - Full hydraulic rim brake system: closed design (no reservoir) - Mounts to cantilever/linear brake post studs (fork and/or frame) - Streamlined alloy brake lever assembly with integrated (TPA) Turbo Pad Wear Adjuster and integrated reach adjust - All hose fittings perfectly hidden with new designed caps - Compatible with all trigger and twist grip shifters - Full-hydraulic Magura mineral oil system with a 5-year leakproof warranty - Includes: flip/flop front or rear lever, 1350mm pre-bled (cut-to-fit) tubing, stud-mounted slave cylinders with mounting hardware, MC/lever, and manual (brake boosters included)
Magura Hydraulic Fittings
$23.00 - $32.00
- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing
Magura Hydraulic Tubing Kits
$24.00
- Reinforced hydraulic tubing designed for Magura mineral-oil fluid - Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit - Sold each: (1) kit per brake - Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately - Choose black or white options for MT Next and MT series
Magura Pro Bleeder Tool Kit
$75.00
- Kit includes full-fluid capture bottle, bleed fittings, hose, syringe and 16oz Magura fluid
Kool-Stop Continental Brake Pads
$10.49
The Continental is Kool-Stop's classic conventional design, for use on older bicycles or brake systems with clearance problems. Great for City Bikes and steel rims. Features: - Internal backbone - Nyloc retaining nut - Thicker pad Specifications: - Weight per pair: 41.6 grams - Overall length: 45.5mm - Pad contact width: 9.4mm
Kool-Stop Cross Brake Pads
$23.25
Kool-Stop's sleek, lightweight cross pad with their triple compound technology is a great choice for competitive cross bike racers. Features: - Forged Alloy Holder - Triple Compound - Lightweight Design Specifications: - Overall length: 54.5 mm - Pad contact width: 7.5 mm
Kool-Stop Dura Set Dual + Salmon Brake Pads
$23.00
The Dura Road Pad is a forged aluminum holder with dual pivot adjustment that houses Kool-Stop's Dual Compound Dura Type insert and comes with an extra pair of their aggressive salmon compound inserts. These will fit most Shimano type brake systems. Features: - Aluminum Holder - Patented Plow Tip - Water Grooves - Dual Pivot Adjustment - Dual Compound - Extra pair of pads Specifications: - Weight per pair: 34 grams - Overall length: 55.5 mm - Pad contact width: 9.8 mm
Kool-Stop Dura-Type Brake Pad Inserts
$6.95 - $12.99
The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders
Kool-Stop E-Bike Disc Brake Pads (Avid)
$18.25
Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistant braking power. - Qty 1 = enough for 1 wheel
Kool-Stop E-Bike Disc Brake Pads (Magura)
$18.25
Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel
Kool-Stop E-Bike Disc Brake Pads (Shimano)
$18.25
Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel
Kool-Stop Magura HS33 Replacement Pads
$9.95 - $13.50
Replacement pads for the popular Magura HS33 and HS11 brake systems. Features rim-friendly compounds: - Black - Standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon - One of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Dual - A fusion of black and salmon compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! - Electric- This compound is formulated specifically for the higher speeds and weights of electric bicycles. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Trials - An extreme compound for only experienced trick or trials riders needing a compound that will instantly lock the wheels.
Kool-Stop Mountain Brake Pads
$9.75 - $13.50
- Extra-long molded pads for MTB linear brakes - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for extreme weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
Kool-Stop Steel Disc Pads (Avid)
$19.90 - $19.99
- High performance compounds recommended for all-conditions - Steel backing
Kool-Stop Steel Disc Pads (Hayes)
$17.00 - $18.25
- High performance compounds recommended for all-conditions - Steel backing
Kool-Stop Steel Disc Pads (Shimano)
$18.25
- High performance compounds recommended for all-conditions - Steel backing
Kool-Stop Steel Disc Pads (Tektro)
$17.00
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel
Kool-Stop Steel Disc Pads (Zoom)
$17.00
Steel backed disc brake pad with and organic compound. - Fits Zoom Disc Brakes - Steel Back w/ Organic Compound - Qty 1 = enough for 1 wheel
Kool-Stop Supra 2 Brake Pads
$12.50
The Supra 2 is an updated design of the original Supra. This is one of Kool-Stop's most popular rim pads and offers a thicker friction material for longer life. Features: - Hardened and plated reinforced steel backbone - Patented angled tip plow - Water grooves - Knurl-lock washer system - Self tow in - Available only in Threaded - Rim Friendly Compounds Compounds: - Salmon - Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Electric - Kool-Stop's E-Electric compound is formulated specifically for the higher speeds and weights of electric bicycles. - Clear - An extreme compound for only experienced trick or trails riders needing a compound that will instantly lock the wheels. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Pink - Colored pads are a semi–aggressive compound that will give you good performance in all weather conditions. Specifications: - Weight per pair: 60.6 grams - Overall length: 66.5 mm - Pad contact width: 9.1 mm
Kool-Stop Tectonic Brake Pads
$21.95
The Tectonic brake pad is a forged alloy holder that allows the rider to customize the exact positioning of the friction materials. The friction inserts are designed to interlock together and are secured into the holder on all sides. The Pad-Lock washer system has been improved by incorporating the convex pivot adjustment into the backing plate; thus allowing for the reduction in the number of washers needed to achieve all spacing requirements. The Tectonic pads come with a multi friction compound set up, but single or dual compounds can also be configured. Features: - Aluminum Holder - Integrated Pad-Lock Hardware - Secured End Cap - Interchangeable Compounds - Offset Post - Water Grooves - Available in Threaded and Cantilever (Non-Threaded) Specifications: - Weight per pair: 50.8 grams - Overall length: 73.3 mm - Pad contact width: 9.5 mm
Kool-Stop V Type Brake Pad Inserts
$6.95 - $9.99
Replacement inserts for Shimano cartridge v-brake pads - Black: standard compound designed for dry condition riding - Red: semi-aggressive compound for good performance - Salmon: aggressive compound for extreme weather conditions - Green: designed for ceramic coated rims - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
Kool-Stop V-Type 2 Brake Pad Inserts
$8.00 - $10.00
Kool-Stop's New V-Type 2 insert just got heavier with 1.5mm more pad material than the original V-Type insert. Still fits most Shimano Style V-Brake holders Features: - Water Grooves - Dual Compound - Rim Friendly Compounds: - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! - Salmon: Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Triple: Kool-Stop's triple compound is their most aggressive compound combination for superb braking and controlled stopping in all weather conditions. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Carbon 2: This compound works great on most carbon wheels and is designed to withstand those fast steep descents without a lot of pad wear. - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding.
Kool-Stop Vans Brake Pads
$10.50 - $11.20
Braking can be fun by adding a pair of real Vans Brake Shoes. Available in assorted colors. Features: - Rim friendly compounds - Threaded steel post - Steel hardware Specifications: - Weight per pair: 56.9 grams - Overall length: 46.1mm - Pad contact width: 13.1mm
Jagwire LR1 Pro Lightweight Disc Brake Rotors
$59.99
Jagwire's LR1 Pro Lightweight Rotors are a stylish way to upgrade the performance on your bike. Utilizing a 2-piece construction, they feature a separate aluminum spider and stainless steel brake track. The steel braking surface delivers quiet, consistent performance while the spider helps reduce rotating weight by about 15% compared to a traditional single-piece rotor. - The high quality, durable stainless steel machined braking surface ensures consistent stopping power and superior modulation - Lightweight aluminum spider keeps weight to a minimum - Available for either Center Lock or 6-Bolt ISO hubs - NOTE: LR1 rotors are NOT compatible with brakes when the pad extends below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1